ES | CN

ETA approved NJMKT anchors

+86 025 8665 1110
Home >> News

Do the floor slabs still crack after the reinforcement of the carbon fiber?

Dec. 14, 2017

Do the floor slabs still crack after the reinforcement of the carbon fiber? The floor slabs of many old houses have inside displacement, middle depression, arch shape, cracks and even the steel bars and prestressed steel of the bottom of the beams are exposed after use for many years, which causes corrosion and serious damages to the life of the building. So many projects will choose to use carbon fiber cloth to reinforce the floor slabs. However, will the floor slabs not have any problems after the reinforcement of carbon fiber cloth? Whether there will be hidden danger?

 

 20171209215417_3938_副本.jpg

Commonly used method of floor damage is carbon fiber cloth reinforcement. That is pasting a layer of carbon fiber cloth on the bottom of the floor, inner side of the beam, beam bottom and the outer side. If you want to avoid subsequent hazards, you must choose reliable carbon fiber cloth manufacturer. Nanjing Mankate is the earlier carbon fiber cloth manufacturer in China. The tensile effects of Mankate carbon fiber cloth are excellent. It will not crack for 50 years. Mankate warranty 50 years!  The cloth surface is smooth.  It adheres to the advantages of high strength, high modulus of elasticity, corrosion resistance and anti-aging. The tonsil strength reaches 3800MPA. It won’t be corroded by chemical materials and can meet a variety of beams and floor reinforcement needs.

 

When pasting the carbon fiber cloth, it is recommended to use the matched Mankate carbon fiber glue. Mankate carbon fiber glue has many advantages. For example, anti-heat and anti-aging for 50 years! high and low temperature resistance, both 135 degrees and minus 5 degrees are available.Non-toxic Mankate carbon fiber glue and Mankate carbon fiber cloth can form a complete carbon fiber reinforced system. If you want to enhance the quality of carbon fiber cloth to a higher level, after pasting carbon fiber cloth,  the conservation also is needed. After the construction, until the glue surface is dry, we can use fire coating or cement mortar spray to do the protective layer. This will be more secure and beautiful.

We cant ignore the floor slabs problems. If you need a carbon fiber cloth manufacturer with good quality and assurance, please choose Nanjing Mankate! Quality warranty for 50 years!

 

Hotline: 400-894-5118

Editor: Nanjing Mankate

Copyright by www.njmkt, net, for reprint, please indicate the source!