At present, a large number of buildings in China have entered the age of maintenance and reinforcement. Due to the era, domestic reinforcement technology has also achieved unprecedented development. The following manufacturer of prestressed carbon fiber board manufacturers, Mankate, will show you the advantages and disadvantages of the four commonly used reinforcement technologies:
The products listed in the table are basically available. We will focus on the currently popular prestressed carbon fiber board reinforcement anchorage system. This system basically does not increase its own weight and does not damage the original structure. The cracks are basically maintenance-free in the later stage, so they are widely used in bridge reinforcement and building basement reinforcement. Let us take a look at some successful cases:
The project is a basement of a high-end community. Vanke Group, which has always been famous for its quality, has strengthened the expensive prestressed carbon fiber board in order to make the owners have a safer home.
This project reinforces the famous Gongzhuling Bridge prestressed carbon fiber board anchorage tensioning system. This project has withstood the test of low temperature and severe cold and is still in good service.
People who don’t understand what is a new type of building decoration material. It turned out to be Mankate’s prestressed carbon fiber board anchorage tensioning system reinforcement material. Such a “ceiling material” not only guarantees the safety of workers and consumers inside. Without losing its beauty, it can be said that it serves two purposes.
Due to the popularity of the prestressed carbon fiber board anchorage tensioning reinforcement system, a relatively chaotic situation has also appeared on the market, making it difficult for consumers to choose the right one. As a reinforcement and repair project, try not to damage the original structure, but some anchors need to move the original structure. Here we recommend that you use Mankate prestressed carbon fiber board to strengthen the anchor, without the need to move the original structure or groove. It can also be closer to the base surface than ordinary slotted anchors, so that it can save more glue, save the tools and labor costs for slotting, and lower the engineering cost and safer.
Pre-stressed carbon fiber board manufacturer Mankate will show you the pros and cons of 4 commonly used reinforcement technologies. If you still have some questions, please contact Mankate. After-sales technology tracking service throughout the whole process, enthusiastic Mankate looks forward to working with you for a win-win cooperation ~
