The planting bar glue is a strange word, but it actually appears in every aspect of your life. For example, the outer wall insulation layer on the high-rise residential buildings where everyone lives. But due to the immature technology, the incident of the outer wall insulation board of the community is often seen in the newspapers.
The high-rise residential aerated concrete block exterior wall insulation board is pasted, basically relying on the bonding force of the bonding mortar. After a long time, it is easy to fall off. This problem can be solved by the bonding between the anchor and the wall of the aerated block and the use of the planting bar adhesive technology.
The specific construction process has the following requirements:
1. Stick the anchor nails to the wall of the aerated block with the reinforced adhesive, and firmly attach the extruded plate to the wall through the anchor nail cap force to prevent the extruded plate from falling off.
2. The exterior wall is not plastered, saving labor and materials, preventing the dust from empty and falling off.
3. Extrusion polystyrene board (XPS) is used as the thermal insulation material because of its small thermal conductivity coefficient, so it has excellent thermal insulation properties.
4. This process not only adopts the high-strength tensile reinforced adhesive, but also applies special interface treatment agent on both sides of the extruded board. The interface agent is sticky after drying and can be modified with polymer. Cement mortar produces a chemical bond. Moreover, all the extruded polystyrene board (XPS) are anchored by the anchor, that is, the connection with the base wall is all bonded by the nail, which improves the bond strength and tensile strength of the system. This significantly has improved the system and the integrity of the system and the base wall.
Nanjing Mankate reinforced adhesive is mainly composed of epoxy resin and curing agent. It is a two-component epoxy adhesive with A, B. It has thixotropic properties, high tensile and shear strength, excellent resistance to damp heat aging and fatigue resistance. The load-displacement characteristics are good, and the effect of embedding is achieved by bonding and locking. If you are interested in this product, please call our one-stop service hotline: 400-894-5118.
Link to this article: https://www.njmkt.net/Article/zjjzwqbwsg.html
(Editor: Nanjing Mankate, if you need to reprint, please indicate the source)
