Nowadays, the bottled adhesive is required to be artificially mixed and stirred, so there is often a situation of uneven mixing, but for the quality of the later building reinforcement, it is recommended to mix evenly with patience.
Originally, when the bottled planting bar adhesive is used, there is a problem that it is difficult to ensure that the artificial proportioning is strictly performed according to the required ratio, and that the manual stirring is not uniform, which will affect the quality of the mixed colloid. In the later construction process, the current construction process of some barreled reinforced rubber is not guaranteed to allow the colloid to completely fill the entire hole like the injection-type reinforced rubber (but NJMKT barreled reinforced rubber MKT-T/AA has the matching glue gun which can be injected into the hole like the injection type of reinforced rubber. So that even if there is no difference in the formulation and quality of the injection-type reinforced rubber produced by the same manufacturers, but for the construction there is no way to compare the quality with the implanted rubber.
Although, from the perspective of unit price, barreled reinforced rubber is indeed much cheaper than injection-type reinforced rubber, but considering the convenience of injection-type planting bar adhesive, the reduction of waste and the shortened construction period caused by the accelerated construction, both the construction cost is almost the same, and the cost of the injection typea is slightly lower when the amount of planting bar adhesive is large. Moreover, the current injection-type adhesive is not only imported from abroad, but also domestically produced injection-type adhesive with good quality and convenient use. MT-500 planting bar rubber, which is often used in subways, high-speed rails and even nuclear power plants, is independently developed and produced by domestic enterprises. The quality can be compared with that of Germany and Japan. The most important thing is that it is not very expensive.
What kind of glue is good in quality, cost-effective, and easy to operate? It is necessary to believe in the state-owned enterprises. It is not wrong to follow them when choosing glue. If you are interested in MT-500 plant bar adhesive, you can go directly to the official website (https://www.njmkt.net/) to consult online customer service, or call 400-894-5118 for telephone consultation.
Link to this article: https://www.njmkt.net/Article/zjjmyjyzmb.html
(Editor: Nanjing Mankate, if you need to reprint, please indicate the source)
