Since the advent of the curved pre-buried channel, it has been widely used in various engineering projects. Its safety, convenience and reliability are favored by construction workers. However, as a new technology, the technical requirements for installation are still very high, and many installations will be biased. Then, once the installation of the curved pre-buried channel is offset, how can it be remedied?
The use of remedies depends on the offset. In general, there will be two cases of positional deviation and positional tilt, and the correctness should be based on the actual deviation.
1. When there is a void below under the curved pre-buried channel due to the offset, it can be filled with cement mortar.
2. When the cause is that the welding is overheated and the offset is caused, the chemical anchor of the rear embedded piece is added with the adapter plate on the original embedded part to prevent the influence of heat.
3. When the reason is that the position of the embedded part of the curved pre-buried channel deviates from the design position, the method of re-emphasizing the pre-embedded anchor plate may be enlarged (or lengthened). That is to say, after the offset of the embedded part, the welding and anchor bolts can be corrected, and the anchor plate is lengthened and then fixed by using the bolt.
4. When the cause is that the embedded part of the curved pre-buried channel is deflected, we can change the angle of the adapter to adapt to the deflection caused by the embedding of the adapter, and even replace it with a new anchor plate if necessary.
It is not difficult to see that there is no fear of the deflection of the curved pre-buried channel. As long as the calm analysis of the causes, the problems can be solved. When you encounter difficult technical problems, you can also consult Nanjing Mankate. Mankate's curved pre-buried channels are sold at home and abroad, and have accumulated a lot of engineering experience, which can help you solve the problems of procurement and installation.
Link to this article: https://www.njmkt.net/Mobile/MArticles/ymcdpyzhym.html
(Editor: Nanjing Mankate, if you need to reprint, please indicate the source)
